Angiotensin III ELISA 试剂盒
This 人 Angiotensin III ELISA Kit is a Colorimetric ELISA Kit designed to quantify 人 Angiotensin III.
Quick Overview for Angiotensin III ELISA 试剂盒 (ABIN5651802)
抗原
See all Angiotensin III (AGT3) ELISA试剂盒
Angiotensin III (AGT3)
适用
人
检测方法
Colorimetric
实验类型
Competition ELISA
检测范围
6.17 pg/mL - 500 pg/mL
应用范围
ELISA
样品类型
Plasma, Serum
-
-
最低检测浓度
- 6.17 pg/mL
-
Analytical Method
- Quantitative
-
特异性
- This assay has high sensitivity and excellent specificity for detection of Angiotensin III (AngIII). No significant cross-reactivity or interference between Angiotensin III (AngIII) and analogues was observed.
-
灵敏度
- 2.77 pg/mL
-
-
-
-
说明
-
The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5 % within the expiration date under appropriate storage condition. To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.
-
实验时间
- 2 h
-
板类型
- Pre-coated
-
实验流程
- This assay employs the competitive inhibition enzyme immunoassay technique. A monoclonal antibody specific to Angiotensin III (AngIII) has been pre-coated onto a microplate. A competitive inhibition reaction is launched between biotin labeled Angiotensin III (AngIII) and unlabeled Angiotensin III (AngIII) (Standards or samples) with the pre-coated antibody specific to Angiotensin III (AngIII). After incubation the unbound conjugate is washed off. Next, avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. The amount of bound HRP conjugate is reverse proportional to the concentration of Angiotensin III (AngIII) in the sample. After addition of the substrate solution, the intensity of color developed is reverse proportional to the concentration of Angiotensin III (AngIII) in the sample.
-
实验精密度
-
Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Angiotensin III (AngIII) were tested 20 times on one plate, respectively
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Angiotensin III (AngIII) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12% -
限制
- 仅限研究用
-
-
-
注意事项
- The Stop Solution is acidic. Do not allow to contact skin or eyes. Calibrators, controls and specimen samples should be assayed in duplicate. Once the procedure has been started, all steps should be completed without interruption.
-
储存条件
- 4 °C,-20 °C
-
储存方法
- -20°C. Bring all reagents to room temperature before beginning test. The kit may be stored at 4°C for immediate use within two days upon arrival. Reseal any unused strips with desiccant pack. Minimize freeze/thaw cycles.
-
有效期
- 4-8 months
-
-
- Angiotensin III (AGT3)
-
别名
- Angiotensin III
-
背景
-
Gene Name: Angiotensin III
Gene Aliases: Ang-III, Angiotensin-3
抗原 See all Angiotensin III (AGT3) ELISA试剂盒
-
You are here:
